Panasonic AW-RL400G, AW-RP400E, AW-RC400E manual $ List of menu items and settings

Pan/Tilt Head Controller AW-RP400

Menu settings

$ List of menu items and settings

Menu item	Setting	Description	Initial value
PRIORITY		MASTER, SLAVE	MASTER
DIRECTION	PAN
	TILT
	ZOOM	NORMAL, REVERSE	NORMAL
	FOCUS
	IRIS
	ROTATION
SPEED WITH ZOOM POS.		OFF, 1, 2, 3	OFF
MEMORY LENGTH		60s, 120s, 300s, 600s	60s
PRESET SPEED		1 to 25	25
IRIS CONTROL		BOTH, RP400, CB400	BOTH
ROTATION SWITCH		ROTATION, FOCUS, ZOOM, IRIS	ROTATION
OPTION SWITCH	A
	B
	C	NOT USE, LAMP, EFROSTER, WIPER,
	D
		HEATER/FAN, AF, ND, OPTION,	NOT USE
	E
		EXTENDER
	F
	G
	H
CONTROL SELECT MODE		INTERLOCK, UN-INTERLOCK	INTERLOCK
MONITOR2 SELECT	(When the controller	CB400, SLAVE	CB400
	is the master)
	(When the controller	RP400, CB400	RP400
	is the slave)
BUZZER		OFF, ON	ON
AUTO RUN	START No.	1 to 50	1
	END No.	1 to 50	50
	INTERVAL	1s to 30s	1s
	OPERATE	STOP, RUN	STOP
SD CARD		STORE, LOAD	– – –

ENGLISH

PRIORITY (MASTER/SLAVE)

When two AW-RP400 pan/tilt head controllers have been connected, the priority of the CONTROL SELECT buttons is to be set.

When MASTER is selected as the setting, the master AW-RP400 has priority; when SLAVE is selected, the slave AW-RP400 has priority.

If the AW-RP400 controller with a high priority has selected the pan/tilt heads, which were selected by the AW-RP400 controller with a low priority, the CONTROL SELECT button lamps on the AW-RP400 controller with the low priority start flashing to indicate that the control rights have been ceded to the other controller. This setting is performed using the master AW-RP400 controller.

26 (E)