Panasonic BB-HCM371A operating instructions That GND pin and pin 1 or pin 2 is left open

	Operating Instructions
Setting	Description
Enable Image	• Check the box to enable the buffer/transfer. Clear the box
Buffer/Transfer	to disable it.
Trigger	• Selecting [Timer] enables the camera to buffer/transfer the
	image by timer.
	• Selecting [Alarm 1 or 2] enables the camera to buffer/
	transfer the image by alarm signal.
Alarm enable	• Select [Rising: GND to Open (High).] or [Falling: Open
condition	(High) to GND.]. [Rising: GND to Open (High).] is the state
	that GND pin and pin 1 or pin 2 is left open.
	[Falling: Open (High) to GND.] is the state that GND pin
	and pin 1 or pin 2 is short-circuited. (see page 129)

4.Set the time, and click [Next>].

Note

The timer works by an internal clock. Set the date and time before using timer buffer/transfer (see page 68).

•Clicking [<Back] takes you back to the previous page.

•Clicking [Cancel] takes you back to the Image Buffer/Transfer page without saving changes.

Setting	Description
A day of the	• Check the box to enable the day. Clear the box to disable it.
week
Active Time of	• Select the [Always] option when you do not specify the time
Trigger	period. If you specify the time period, select the time period
	option and set the time period.

[For assistance, please call: 1-800-272-7033] 101