Operating Instructions
106
Setting Description
Server IP
Address or
Host Name*1
*1 But [Space], ["], ['], [&], [<] and [>] are not available.
• If you set the server IP address, se t 4 digits (0—255) and 3
periods such as "192.168.0.253". But "0.0.0.0" and
"255.255.255.255" are not available. Or set a host name (1—
255 characters).
• You can set IPv6 address.
Port N o. • Enter the number (1—65535). Usually set to 21.
Login ID*2
*2 But ["] is not available.
• If your ISP requires a login ID, set it (0—63 characters).
Passwor d*2 • If your ISP requires a password, set it (0—63 characters).
Login Timing • Select the login timing to an FTP server. If you set [One Time]
during 1-minute transfer, the camera logs in to the server only
once, and can reduce the time to log in or log out.
Upload File
Name*1
• Set the file name to save on an FTP server. Enter 1—234
characters. Entering "\" creates directories for a file. (E.g.
NetworkCamera\image.jpg)
Overwrite
Setting
• Selecting [Overwrite File] saves and overwrites the image on
the server. Selecting [Save as New File with Time Stamp]
saves the image attaching time stamps on the file name, and
the images are not overwritten.
Data
Tra n s fe r
Method
• Select [Passive Mode] normally. If FTP does not work, select
[Active Mode] and check the operation.