Operating Instructions

Notes

Some wireless devices do not support the WEP 152 bit.

The camera supports only the open system authentication. If the wireless router or access point is set to shared key authentication, set it to auto or open system.

4.Click [Save] when finished.

New settings are saved.

When finished, "Success!" is displayed.

5.Click [Go to Wireless configuration page].

The Wireless page is displayed.

Notes

Encryption is a help to avoid being read the data within wireless LAN by others.

Enter both the MAC addresses for the camera itself and the camera's wireless module to enable the MAC address filtering feature on the wireless router. The wireless module MAC address is one value higher than the camera MAC address.

It takes about 1 minute for the new settings to be effective.

It is not possible to access the camera simultaneously by both wired and wireless connection.

To use the wireless connection, first access the camera by using the wired connection and configure the wireless settings. Then, disconnect the Ethernet cable and turn the power off and on.

[For assistance, please call: 1-800-272-7033]

63

Page 63
Image 63
Panasonic BB-HCM371A operating instructions Operating Instructions