Operating Instructions
Tunnel Mode (IPv4/IPv6)
An IPsec mode of operation where the entire IP packet including IP header is authenticated and encrypted. A new IP header is added (protecting the entire original packet). Both VPN clients and VPN gateways can use this mode.
Note
The camera can be accessed only from the PCs under the VPN router. Other PCs cannot access the camera.
LAN | WAN |
| Tunnel Mode |
Not Encrypted | Encrypted |
Prepare the following requirements.
| Item | Supported Feature |
|
|
|
PC | Operating System | : Windows XP, Windows 2000, Windows |
|
| Me, Windows 98SE (in IPv4) |
|
| : Windows XP Service Pack 1 or later (in |
|
| IPv6) |
| Web Browser | : Internet Explorer 6.0 or later |
|
|
|
Router | ISP Service | : Static global address service (A global |
| (in IPv4) | address must be set up to the WAN side of |
|
| the router.) |
| ISP Service | : "IPv4/IPv6 |
| (in IPv6) | Tunneling" service |
| Note |
|
| See the Panasonic Network Camera support website at | |
| http://panasonic.co.jp/pcc/products/en/netwkcam/ for | |
| the recommended router. | |
|
|
|
Camera | ISP Service | : Services for multiple global addresses (A |
| (in IPv4) | global address must be set up to the |
|
| camera.) |
| ISP Service | : "IPv4/IPv6 |
| (in IPv6) | Tunneling" service |
[For assistance, please call: | 53 |
