Operating Instructions
2.25 Controlling External Output Terminal
The digital output terminal allows you to control the external devices. You can change the initial status of the output signal.
1.Click [External Output] on the Setup page.
2.Click [Save] when finished.
•Clicking [Cancel] cancels your settings without saving changes.
•New settings are saved.
•When finished, "Success!" is displayed.
Setting |
| Description |
|
|
|
External Device | • | If you check [Open], the internal transistor turns off and the |
Control Output |
| external output terminal gets high impedance (open |
|
| collector) when the camera powers up. If you check [Short |
|
| to GND], the internal transistor turns on and is electrically |
|
| |
|
| The external output terminal gets low impedance (0 V). |
|
|
|
Button name | • | You can change the output control button names on the |
modification |
| operation bar. You can name the button depending on your |
|
| external devices. |
|
|
|
3.Click [Go to External Output Control page].
• The External Output Control page is displayed.
[For assistance, please call: | 115 |
