Operating Instructions
Main Features
Splash Resistant body for indoor and outdoor use
Your Panasonic Network Camera has a splash resistant body. The splash resistant body allows the camera to be used indoors or outdoors.
Wireless Communication
Network Camera corresponds to the wireless system based on IEEE 802.11b/g. Wireless installation will play an increasing role in flexible mounting. Communication via Ethernet® cable is also available*1. Encryption establishes the security on the wireless network.
IPv6*2 Network Camera
Your Panasonic Network Camera supports IPv6 (Internet Protocol Version 6), IPv6 was created to address the additional IP addresses that will be needed as the Internet continues to expand. Since the camera also supports IPv4 that's currently used, it is "dual stack" design will seamlessly operate while IPv6 is phased in. For more information in IPv6 you wish to visit http://www.ipv6.org/. See page 15 for more information.
Audio
Your Panasonic Network Camera now provides
For example, the camera can be used in the following various locations:
•In the baby's room, to hear if the baby is crying.
•At the front door, to see and hear who is at the door.
•In the children's play room, to see and hear if they are safe.
Note
PLEASE NOTE that under certain circumstances, audio/video recording may be PROHIBITED by law. This device should be used only in compliance with all applicable federal, state and local statutes.
*1
*2
*3
It is not possible to access the camera simultaneously by both wired and wireless connection. To connect in IPv6, subscribe to the ISP's "IPv4/IPv6
Audio feature does not work on cell phones. Talk button and Listen button cannot be used simultaneously. In consequence of traffic and network environments, the audio may be delayed or may break up.
2
