Operating Instructions
DHCP Setup | Static Setup |
•Clicking [Cancel] takes you back to the previous page without saving changes.
4.Click [Save] when finished.
•New settings are saved.
•When finished, the following page is displayed.
Note
The current network settings are shown on the Status page in the Maintenance section (see page 118).
5.Click [Restart].
•The camera restarts, and the Top page is displayed.
•If the camera is restarted, all buffered images on the internal memory are deleted. The buffered images on the SD memory card are not deleted.
•Checking [Yes] for [Allow Access from the Internet] on [Automatic Setup] may not display the Top page, because the port number may change. Use the Setup Program to access the camera.
[For assistance, please call: | 43 |
