Panasonic BB-HCM371A operating instructions Factory Default Reset Button

Operating Instructions

3.5FACTORY DEFAULT RESET Button

The camera has a FACTORY DEFAULT RESET button on the side.

FACTORY DEFAULT RESET Button

(Press the button with a pointed object.)

Pressing the FACTORY DEFAULT RESET button resets the camera to factory default. If you lose your user name and password, use this button to reset the camera. To restore the wireless connection, access the camera by using the wired connection and set up the wireless configuration. (see page 17 of the Installation/ Troubleshooting)

•Press the FACTORY DEFAULT RESET button for 1 second when the camera is on.

•The indicator blinks orange, and then turns off for 5 seconds.

•Do not turn off the camera until the indicator lights green.

Notes

•After removing the sunshade, press the FACTORY DEFAULT RESET button.

•The internal clock will not be reset, but the time format will return to AM/ PM mode (see page 68). Set it again.

•See page 133—page 140 for default settings.

•All buffered images on the internal memory are deleted when resetting the camera to factory default. The buffered images on the SD memory card are not deleted.

•The reset operation takes about 1 minute.

132