Operating Instructions
3.3External I/O
If you connect the external devices such as sensors to the External I/O and image buffer/transfer by alarm signal is set, the camera image is transferred by the alarm detection.
Explanation of the External I/O
Pin | Features |
|
|
G | GND pin |
|
|
1 | External Sensor Input 1 |
| • Use it by opening or GND |
|
|
G | GND pin |
|
|
2 | External Sensor Input 2 |
| • Use it by opening or GND |
|
|
3 | External Device Control Output |
| • You can control it on the External Output page (see page 115). |
| • It is an open collector circuit, and the maximum |
| is the same as pin 4. Do not exceed the voltage of DC power |
| output terminal (pin 4). |
|
|
4 | DC Power Output Terminal |
| • |
| • Maximum of 100 mA load drive is possible. |
|
|
Note
The External I/O (Input/Output) are independent. Output terminal is controlled only by External Output Control page on page 115.
[For assistance, please call: | 129 |
