1.Remove the Front Grille according to 13.3.1.1.
2.Remove the Motor by removing the screw (one). Be careful of the Heat Exchanger Fins.
Note: Replace a plastic part of the Front Panel Motor with a new plastic complete part for servicing in order to avoid loss of the parts such as gear although it can be disassembled with a precision screwdriver.
Fig. 29
Fig. 30
13.3.1.9. Removal of IonizerRemove the Ionizer from the Heat Exchanger by unscrewing the screw (One) on the lower right.
Fig. 31
76