13.3.2. Disassembly of Outdoor Unit13.3.2.1.Removal of Cabinet Top Plate and Cabinet Front Plate

1.Remove the screws (three: two on the right side and one on the left side) and the Cabinet Top Plate.

2.Remove the screws (six: three on the upper side and another three on the lower side) on the Cabinet Front Plate.

Fig. 1

3.Release the hooks (four: two on the right and another two on the left) of the Cabinet Front Plate and remove the Front Plate by holding it up a little.

Fig. 2

CS-HE9DKE CU-HE9DKE / CS-HE12DKE CU-HE12DKE

13.3.2.2.Removal of Control Cover and Terminal Cover

1.Remove the Front Grille according to the procedure 13.3.1.2.

2.Remove the screw (one) on the Control Cover and remove it by sliding it downward.

Fig. 3

3.Remove the Terminal Cover by removing the screws (two) and releasing the hooks (two).

Fig. 4

77