Panasonic DMC-GH4 owner manual Setting up a connection using the NFC function

Wi-Fi/NFC

When using an Android device

Setting up a connection using the NFC function

•If [ ] is not displayed on the smartphone, the NFC function of the smartphone is disabled. Read the operating instructions of your smartphone and enable it.

•This function can be used with the NFC compatible device with Android (OS version 2.3.3 or higher). (excluding some models)

1 Launch “Image App” on your smartphone/ tablet.

2 While [ ] is displayed on the screen of the smartphone, touch the smartphone to [ ] of the camera.

3When the connection confirmation screen

is displayed on the camera, select [Yes].

4Touch the smartphone to [ ] of the

camera again.

• Steps 3 through 4 are not required from the second time on.

• For information on the operation and settings of NFC-compatible smartphones, refer to the operating instructions of your device.

When using an Android device

Using the QR code to set up a connection

1 Press and hold [Wi-Fi] on the camera.

ョㄏヒ

ヸㄊノョㄊ

2Start “Image App” on your smartphone/tablet.

3 Select [QR code].

4Scan the QR code displayed on the screen of the camera.

A QR code

•If you press [MENU/SET] on the camera, the QR code will be enlarged. When it is difficult to scan the QR code, try

enlarging it.

A

78 VQT5H68 (ENG)