Wi-Fi/NFC

1Press [Wi-Fi].

2Select [New Connection].

3Select the connection method.

Sending an image each time a recording is made

([Send Images While Recording])

Available file format: JPEG/RAW/MPO

Select and send the images

([Send Images Stored in the Camera])

Available file format: ALL format

4Select [PC].

5Select the connection method.

Example: Selecting [WPS (Push-Button)] to set up a connection

1Select [Via Network].

2Select [WPS (Push-Button)].

3Press the wireless access point WPS button until it switches to WPS mode.

6On the camera, perform the operation that matches your purpose.

Sending an image each time a recording is made ([Send Images While Recording])

1Select the PC you want to connect to and the destination folder.¢

2Take a picture with the camera.

Select and send the images

([Send Images Stored in the Camera])

1Select the PC you want to connect to and the destination folder.¢

2Select [Single Select] or [Multi Select], and then select the images you want to send.

ョㄏヒ

ヸㄊノョㄊ

¢When the PC you want to connect to is not displayed, select [Manual Input], and enter the

computer name of the PC (NetBIOS name for Apple Mac computers).

To change the setting or disconnect, press [Wi-Fi]. (P75)

Folders sorted by the sent date are created in the specified folder, and pictures are saved in those folders.

If the screen for a user account and password entry appears, enter the one you set on your PC.

When the computer name (NetBIOS name for Apple Mac computers) contains a space (blank character), etc., it may not be recognized correctly.

If a connection attempt fails, we recommend that you change the computer name (or NetBIOS name) to the one consisting of only alphanumeric characters, with a maximum of

15 characters.

84 VQT5H68 (ENG)

Page 84
Image 84
Panasonic DMC-GH4 Select and send the images Send Images Stored in the Camera, Select PC Select the connection method