Panasonic DMC-GH4 owner manual This battery cannot be used, No picture to send, Connection failed

Others

[This battery cannot be used]

•Use a genuine Panasonic battery. If this message is displayed even when a genuine Panasonic battery is used, contact the dealer or Panasonic.

•If the battery terminal is dirty, clean it and remove any objects.

[Failed to connect wireless access point]/[Connection failed]/[No destination found]

•Check following regarding the wireless access point.

–The wireless access point information set on this unit is wrong. Check the authentication type, encryption type, and encryption key.

–Power of the wireless access point is not turned on.

–Setting of the wireless access point is not supported by this unit.

•Check the network setting of the destination.

•Radio waves from other devices may block the connection to a wireless access point. Check other devices that are connected to the wireless access point and devices that use the 2.4 GHz band.

[No picture to send]

•This is displayed when there is no image to transmit due to the restriction of the destination. Check the file format of the image to send.

[Connection failed. Please retry in a few minutes.]/[Network disconnected. Transfer stopped.]

•Radio waves from the wireless access point are getting weak. Perform the connection closer to the wireless access point.

•There is no reply from the server or it has exceeded the communication processing time. Try again after a while.

•Depending on the wireless access point, connection may be automatically disconnected after specific time has passed.

Reconnect the connection again.

[Connection failed]

•Check following regarding the smartphones/tablet you intend to connect.

–The smartphone/tablet does not operate.

–Change the access point to connect to in the smartphone/tablet Wi-Fi settings to this camera.

–There is no free storage space on the smartphone/tablet.

98 VQT5H68 (ENG)