Panasonic DMC-GH4 owner manual Select Geotagging, Sending and writing location information

Wi-Fi/NFC

Adding location information to images stored in the camera from a smartphone/tablet

You can send location information acquired with a smartphone to the camera. After sending the information, you can also write it on images stored in the camera.

1Start recording location information

2Start recording images

3Finish recording the location

information

4Sending and writing location information

GPS







• Location information different from that
at the time of recording may be written.	
Keep the following points in mind:

–Set the camera’s [Home] setting in [World Time] to your region.

–Once you start recording location information with your smartphone, do not change the camera’s [Home] setting in [World Time].

•Location information cannot be written on images that were recorded when the clock was not set.

∫Start recording location information

Operate the smartphone.

1 Select [ ]. 

2Select [Geotagging].

3 Select [ ].

∫Finish recording the location information

Operate the smartphone.

1 Select [ ]. 

2Select [Geotagging].

3 Select [ ].

∫Sending and writing location information

1	Connect to a smartphone. (P76)
2	Operate the smartphone.	

1Select [ ].

2Select [Geotagging].

3 Select [ ].

•Follow the on-screen messages to operate the smartphone.

•Location information is not written onto the images recorded when [Rec Format] is set to [AVCHD].

•When the card in the camera lacks sufficient free space, writing location information may not be possible.

•Cautions for Use:

Be sure to pay special attention to the privacy, the likeness rights, etc. of the subject when you use this function. Use at your own risk.

•(When using “Image App” for iOS)

If you press the Home or On/Off button of a smartphone while [Rec. loc. Info] is working, location information recording is stopped.

82 VQT5H68 (ENG)