Panasonic DMC-GH4 owner manual DISP. button Switching the displayed information, Recording Mode

Preparation

Even when the camera is operated using the touch screen, it is possible to operate with the cursor button and [MENU/SET] button if a guide like the one shown on the right is displayed. Even on menu screens etc. on which the guide is not displayed, you can make settings and selections by operating the buttons.

•By assigning [Cursor Button Lock] to a function button, you can disable the cursor buttons, the [MENU/SET] button, and the control dial. (P85)

[DISP.] button (Switching the displayed information)

Press [DISP.] to switch the information displayed on the screen.

In Recording Mode

ュリヴヱハ

•Screen will switch as follows: (Example of monitor display)

With information	Without
	information

MOV	4:3	AFS
FHD 24p	L
	0	98

With information

(tilt sensor display)

MOV	4:3	AFS
FHD 24p	L
	0	98

Without

information (tilt sensor display)

On-monitor

Turned offrecording information¢1

ISO	0		0
AUTO	0
AFS	4:3	Wi-Fi	Fn
	L
AWB		98

¢1 It is displayed when the [Monitor Info. Disp.] of the [Custom] menu is set to [ON]. (P103) Settings can be adjusted directly by touching each of the items displayed on the screen.

•If you set [Guide Line] in the [Custom] menu, the guide lines are displayed. (P103)

•If no operation is performed, part of the information on the screen will gradually become darker after approximately 10 seconds has passed, and will no longer be displayed after approximately 1 minute has passed. Pressing the [DISP.] button or touching the monitor will make the display reappear. This operation is to prevent screen burn-in and is not a malfunction.

24 VQT5H68 (ENG)