Panasonic DMC-TZ50 Applications 5 Taking pictures with self-timer, Exposure, Display ‘EXPOSURE’

SELECT

EXIT MENU

Third picture +1EV (Brighter)

AUTO BRACKET

Press several times

2 Select a value

‘0’ (no compensation)

First picture 0EV (Standard)

Display ‘AUTO BRACKET’

The compensation value is displayed on the

bottom-left of the screen. ( , etc.)

AUTO BRACKET

SELECT

EXIT MENU

Value displayed after exposure compensation set

Cannot be used with flash or when there is remaining capacity for only 2 more pictures.

When ‘AUTO BRACKET’ is set, is displayed on the left of the screen.

Canceled when the power is turned off.

Burst setting is canceled when auto bracket is set.

Second picture -1EV (Darker)

e.g. AUTO BRACKET with ±1EV

Takes 3 pictures in succession, changing the exposure. After exposure compensation, the compensation value is as standard.

1

Under-exposed

Applications 5 Taking pictures with self-timer

(Record)

We recommend using a tripod. This is also effective for correcting jitter when pressing the shutter button, by setting the self timer to 2 seconds.

Applications 6 Taking pictures with exposure

(Record) compensation

Corrects exposure when adequate exposure cannot be obtained (if difference between brightness of object and background, etc.). Depending on the brightness, this may not be possible in some cases.

1 2

3

Display ‘SELFTIMER’

Select time duration

SELFTIMER

OFF

10SEC. 2SEC.

SELECT SET

Displayed for approx. 5 sec.

Can also be selected with ◄.

Take a picture

• Focus will be automatically

	adjusted immediately
Press halfway	before recording if shutter
	button is pressed fully here.
(align focus)

EXPOSURE

1 Display ‘EXPOSURE’		Example of exposure compensation
		Over-exposed
2	Select a value	Minus direction
	‘0’ (no compensation)
	EXPOSURE	Optimum exposure
		Plus direction

5

Press fully
(Picture taken
after selected
time elapsed)	CANCEL MENU

• To cancel while in operation → Press ‘MENU/SET’

Self-timer indicator (Flashes for set duration)

After self-timer lamp stops flashing, it may then be lit for AF assist lamp.

This function cannot be used in the ‘UNDERWATER’ and ‘HI-SPEED BURST’ scene modes or in MOTION PICTURE mode .

In some modes, only ‘2SEC.’ or only ‘10SEC.’ may be selected.

INTELLIGENT AUTO mode: ‘10SEC.’

CLIPBOARD mode, ‘SELF PORTRAIT’ scene mode: ‘2SEC.’

42 VQT1U22 VQT1U22 43