Connecting

3 Viewing on TV screen

devices

with other

 

You can view pictures on a TV screen by connecting your camera to your TV with the AV cable (supplied) or a component cable (DMW-HDC2, sold separately).

Also consult TV operating manual.

Set-up:• Set ‘TV ASPECT’. (P.26)

Turn off both camera and TV.

Set mode dial to any except .

1 Connect camera to TV

2 Turn on TV

Set to auxiliary input.

3 Turn on camera

View on TV with component terminal

Use component cable (DMW-HDC2, sold separately) to enjoy still and motion pictures in high definition. Check that the TV you are connecting to has a 1080i input terminal.

Connect the camera (COMPONENT OUT terminal) to a TV with a component cable, and set the TV to receive component terminal input.

Hold here (Push until fully inserted.)

Check socket direction and insert straight in. (Damage to socket can lead to faulty operation.)

Yellow: To video socket

White: To audio socket

AV cable

• always use cable supplied

Hold here

(Push until fully inserted.) Check socket direction and insert straight in. (Damage to socket can lead to faulty operation.)

To component terminals

(1080i-compatible)

AUDIO

L

 

AUDIO

 

R

 

 

 

To audio sockets

Component cable

 

(sold separately, DMW-HDC2)

 

If your TV has an SD memory card slot,

you can view still pictures by inserting card directly.

• Use SDHC-compatible TVs to playback images on SDHC memory cards.

Do not use any other AV cables except the supplied one.

You can view pictures on TVs in other countries (regions) which use the NTSC or PAL systems by setting ‘VIDEO OUT’ in the SETUP menu.

Even if ‘VIDEO OUT’ is set to ‘PAL’, the output signal will still be NTSC in recording mode.

When connected with AV cable, pictures will not be displayed on TV during recording of motion pictures in ‘30fps 16:9H’ or ‘15fps 16:9H’, or during recording in ‘BURST’ or ‘HI-SPEED BURST’ scene mode.

‘LCD MODE’ setting is not reflected on TV.

Some televisions may cut off the edges of pictures, or not display them full screen. Pictures rotated to portrait may be blurred slightly.

Change picture mode settings on TV if aspect ratios are not displayed correctly on widescreen or high-definition televisions.

If problems such as picture flickering occur, set ‘VIDEO OUT’ (P.26) to ‘NTSC’.

Playback cannot be performed in clipboard mode and Wi-Fi mode.

Blank stripes may appear at the sides or at the top and bottom of the screen, depending on aspect ratio setting.

Images displayed vertically may be slightly blurred.

Pictures cannot be simultaneously displayed on the LCD monitor.

We recommend recording still pictures with ‘PICTURE SIZE’ of at least 2M, and motion pictures with ‘PICTURE MODE’ set to ‘16:9H’.

Do not use cables other than that specified here (DMW-HDC2, sold separately).

Output will be in 16:9 aspect ratio, regardless of ‘TV ASPECT’ setting.

Component output will be canceled if a USB connection cable is connected.

No picture output will occur through AV cables connected simultaneously.

Audio output is monaural.

Following functions cannot be set in playback mode.

DUAL PLAY, TITLE EDIT, TEXT STAMP, RESIZE, TRIMMING,

ASPECT CONV., AUDIO DUB., COPY, multiple selection (delete, etc), or creating still pictures from motion pictures, etc.

Images may be momentarily distorted immediately after commencing playback or pausing on certain televisions.

86 VQT1U22

VQT1U22 87

Page 44
Image 44
Panasonic DMC-TZ50 operating instructions Viewing on TV screen, Connect camera to TV Turn on TV, Turn on camera