Others 2 Message displays

THIS MEMORY CARD IS LOCKED

Release using the write-protect switch on the SD memory card or SDHC memory card. (P.18)

NO VALID PICTURE TO PLAY

Take pictures, or insert a different card already containing pictures.

THIS PICTURE IS PROTECTED

Release the protection before deleting, etc. (P.79)

SOME PICTURES CANNOT BE DELETED/THIS PICTURE CANNOT BE DELETED

Non-DCF images (P.35) cannot be deleted.

Save all necessary data to computer (or other device), and ‘FORMAT’ (P.27) card to delete.

NO ADDITIONAL SELECTIONS CAN BE MADE

The number of pictures that can be deleted at once has been exceeded.

More than 999 pictures have been set as ‘FAVORITE’.

The number of pictures that can be set at once in ‘RESIZE (MULTI)’, ‘TEXT STAMP’, or ‘TITLE EDIT’ has been exceeded.

CANNOT BE SET ON THIS PICTURE

DPOF settings, ‘TITLE EDIT’, or ‘TEXT STAMP’ cannot be made for non-DCF images (P.35).

PLEASE TURN CAMERA OFF AND THEN ON AGAIN

Force has been applied to lens (or other component) and camera could not operate correctly.

Turn on power again.

(Consult the dealer or your nearest Service Center if display still remains)

SOME PICTURES CANNOT BE COPIED/COPY COULD NOT BE COMPLETED

Pictures cannot be copied in following cases.

Picture of same name already exists in built-in memory when copying from card.

File is not of DCF standard (P.35).

Picture taken or edited on a different device.

BUILT-IN MEMORY ERROR FORMAT BUILT-IN MEMORY?

Displayed when formatting built-in memory via computer, etc.

Reformat directly using camera (P.27).

MEMORY CARD ERROR FORMAT THIS CARD?

Card cannot be recognized on this camera.

Save all necessary data to computer (or other device), and ‘FORMAT’ (P.27).

Meanings of and required responses to major messages displayed on LCD monitor.

MEMORY CARD ERROR PLEASE CHECK THE CARD

Access to card has failed.

Insert card again.

MEMORY CARD ERROR MEMORY CARD PARAMETER ERROR

Card is not of SD standard. Only SDHC memory cards can be used for capacities of 4GB or greater.

READ ERROR PLEASE CHECK THE CARD

Data read has failed.

Check whether card has been inserted correctly (P.17).

WRITE ERROR PLEASE CHECK THE CARD

Data write has failed.

Turn off power and remove card, before re-inserting and turning on power again. Card may possibly be damaged.

MOTION RECORDING WAS CANCELLED DUE TO THE LIMITATION OF THE WRITING SPEED OF THE CARD

We recommend using a card of at least 10 MB/s (as marked on its packaging, etc.).

Motion picture recording may be automatically terminated with certain cards.

A FOLDER CANNOT BE CREATED

Folder numbers in use have reached 999.

Save all necessary data to computer (or other device), and ‘FORMAT’ (P.27). Folder number is reset to 100 when performing ‘NO.RESET’ (P.25).

PICTURE IS DISPLAYED FOR 4:3 TV/PICTURE IS DISPLAYED FOR 16:9 TV

AV cable is connected to camera.

To remove message immediately → Press ‘MENU/SET’.

To change aspect ratio → Change ‘TV ASPECT’ (P.26). USB connection cable is only connected to camera.

→ Message disappears when cable is also connected to another device.

90 VQT1U22

VQT1U22 91

Page 46
Image 46
Panasonic DMC-TZ50 operating instructions Others 2 Message displays