Q&A Troubleshooting

GPS (continued)

Positioning takes time.

●●When using the camera for the first time or after not using it for a while, positioning may take several minutes.

●●Positioning usually takes less than two minutes, but because the positions of the GPS satellites change, it may take longer depending on the recording location and environment.

→ Positioning can be executed faster when you download GPS assist data to the camera using the “GPS Assist Tool”. (→141)

●●Positioning will take time in environments where it is difficult to receive the signals from the GPS satellites. (→128)

The location name information is different from the recording location.

●●Immediately after the camera’s power is turned on or when the GPS icon is something other than

, the location name information that is recorded in the camera may vary significantly from the current position.

●●When is displayed for the location name information, the information can be changed to a different candidate before starting to record. (→136)

●●You can edit a place name or landmark name recorded in a picture.

The location name information is not displayed.

●●“- - -” is displayed if there is no nearby landmark or other points, or no information registered in the camera’s database. (→131)

During playback, a location name or other information can be entered with [Edit Place Name]. (→138)

Map

Cannot display detailed maps.

●●Use the “LUMIX Map Tool” software on the DVD (supplied) to copy map data from the DVD. (→150)

Some place names are not displayed.

●●Detailed maps are displayed when you copy map data from the DVD (supplied). (→150) (Note, however, that not all place names are stored in the DVD.)

●●Place names may not be displayed for some map scale settings. → Enlarge the map scale.

It takes time to copy the map data.

●●Since the map data size is large, it may take time to copy the map data. We recommend copying the map data of a required area only.

●●When you copy map data by connecting the camera to the computer, it may take longer than the time required for copying the data using the commercially available card reader/writer.

Recording

Cannot record pictures.

●●REC/PLAY switch is not set to (record).

●●Built-in memory/card is full. → Free space by deleting unwanted pictures (→49).

Recorded pictures look white. ●●Lens is dirty (fingerprints, etc.).

Turn on power to extract lens barrel, and clean lens surface with a soft, dry cloth. ●●Lens is foggy (→6).

Recorded pictures are too bright/too dark. Adjust the exposure (→71).

[Min. Shtr Speed] is set to fast speed. Check the setting (→102).

- 179 -

Page 179
Image 179
Panasonic DMC-TZ30, DMC-ZS20 manual 179, Troubleshooting