Burst function

Recording mode:

A burst of still pictures can be recorded while the shutter button is pressed fully.

Select [Burst] from the [Rec] menu (→51)

Use cursor button to select the burst setting, and press [MENU/SET]

Setting

Speed

Description

No. of

pictures

 

 

 

 

 

 

 

 

 

 

 

 

 

••The burst speed is adjusted automatically in

 

 

 

 

 

 

 

accordance with the movements of people, pets

 

 

 

 

*1

Approx. 2 - 10

or other subjects. ([Intelligent Burst mode])

1002

 

 

 

••When a fast-moving subject is recorded, the

 

 

 

 

 

pictures/sec.

frame rate becomes faster and the number

 

 

 

 

 

 

 

 

 

 

 

 

 

 

of pictures that can be recorded in a series is

 

 

 

 

 

 

 

restricted to about 10.

 

 

 

 

 

 

 

••The subject is brought into focus as far as this

 

 

 

 

 

 

Approx. 2

is allowed by the burst speed. The pictures are

 

 

 

 

 

 

 

 

 

 

 

 

pictures/sec.

taken with the burst function while the exposure

 

 

 

 

 

 

 

 

 

 

 

 

 

and White Balance are being adjusted.

1002

 

 

 

 

 

 

(However, when the burst function is operating

 

 

 

 

 

 

 

 

 

 

 

Approx. 5

during motion picture recording, the focus is

 

 

 

 

 

 

fixed to the first picture.)

 

 

 

 

 

 

 

 

 

 

 

 

pictures/sec.

••The burst speed may be reduced under certain

 

 

 

 

 

 

 

 

 

 

 

 

 

recording conditions.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Approx. 10

••Focus, exposure and White Balance are fixed in

10

 

 

 

 

 

 

 

 

 

 

pictures/sec.

the first picture.

 

 

 

 

 

 

 

 

 

 

 

 

••Focus, exposure and White Balance are fixed in

 

 

 

 

 

 

40 pictures/sec.

the first picture.

40

 

 

 

 

 

 

••Note on the picture size setting (→88)

 

 

 

 

 

 

 

••Focus, exposure and White Balance are fixed in

 

 

 

 

 

60 pictures/sec.

the first picture.

60

 

 

 

 

 

 

 

 

••The recordable range is reduced.

 

 

 

 

 

 

 

 

 

 

 

 

 

••Note on the picture size setting (→88)

 

 

 

 

 

 

 

••The burst of still pictures can be recorded even

 

 

 

 

 

Complies with

in low light conditions as the flash is used.

 

 

 

 

 

([Flash Burst])

 

 

 

*3

recording

5

 

 

 

 

 

 

conditions

••The focus, exposure, and flash level are all

 

 

 

 

 

 

fixed to the settings for the first picture.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

••Note on the picture size setting (→88)

 

 

[OFF]

The burst function is released.

1 Only in the

mode

 

 

2 The number of burst pictures is limited by the picture-taking conditions and the type and/or

 

status of the card used.

 

 

3 Only in the

, , mode

 

 

- 87 -

Page 87
Image 87
Panasonic DMC-TZ30, DMC-ZS20 manual Burst function, Setting Speed Description No. Pictures