Auto focus
The lens is moved forward or backward automatically to bring the subject into focus. Auto focus has the following characteristics.
jAdjusts so that the vertical lines of a subject are seen more clearly.
jAttempts to bring an object with higher
contrast into focus.
Auto focus does not work correctly in the following situations. Record pictures in the Manual Focus Mode.
jRecording distant and
jRecording a subject behind a dirty or dusty window
jRecording a subject that is surrounded by objects with glossy surfaces or by highly reflective objects
jRecording a subject in dark surroundings jRecording a
Quick start
This unit will resume recording pause mode about 0.6 seconds after the LCD monitor is reopened.
≥When in Quick Start Standby Mode about 70% of the power used in Recording Pause mode is being consumed, so the recording time will be reduced.
¬Change the mode to 
or 
.
1 Select the menu. (l 28)
[SETUP] # [QUICK START] # [ON]
2 Close the LCD monitor while the
mode is set to 
or 
.
The status indicator A flashes green and the unit goes into Quick Start Standby Mode.
≥The lens cover does not close.
3 Open the LCD monitor.
The status indicator A lights red and the unit is put into recording pause.
42
VQT1Y31
