≥Quick Start Standby Mode is canceled if jabout 5 minutes have elapsed
jmode is set to 
junit is turned off
≥Time for Quick Start will be more than 0.6 seconds slower when the digital cinema is used.
≥Depending on the recording conditions, time for Quick Start may be more than 0.6 seconds slower in Still Picture Recording Mode.
≥It may take some time for Automatic White Balance to adjust.
≥In the Quick Start Mode, the zoom magnification becomes 1k.
≥If [ECONOMY] (l 30) is set to [5 MINUTES] and the unit automatically goes into Quick Start Standby Mode, close the LCD monitor and then open it again.
≥Quick Start Standby Mode cannot be released by the remote control. Turn the mode to OFF when powering off.
Quick power on
(Only when recording to an SD card) The unit is put into recording pause approx.
1.9seconds when the mode is set to 
or 
from OFF.
≥ Start time will not shorten if there is no SD card inserted.
¬Change the mode to 
or 
.
1 Select SD card as a media to record from the menu. (l 28)
[MEDIA SELECT] # [SD CARD]
2 Select the menu. (l 28)
[SETUP] # [QUICK POWER ON] # [ON]
≥This function’s default setting is [ON].
≥Depending on the recording conditions, start time may be longer than 1.9 seconds in Still Picture Recording Mode.
≥In the Quick Power on mode, the zoom magnification becomes 1k.
43
VQT1Y31
