66
VQT1Y31

Microphone level

[AUTO]:
AGC is activated, and the
recording level is adjusted
automatically.
[SETr]/[SET]:
The desired recording level
can be set.
AGC: Auto Gain Control
When recording, the input level from the built-in microphones
can be adjusted.
Change the mode to .
The Intelligent Auto Mode is set to off. (l40)
1Select the menu. (l28)
[RECORD SETUP] # [MIC LEVEL] # [SETr]/[SET]
2Touch / to adjust the microphone input

level.

ACenter
BFront left
CBack left
DFront right
EBack right
FMicrophone input level
Touch to activate/disactivate AGC.
When AGC is activated, the icon is surrounded by yellow and the
amount of sound distortion can be reduced. When AGC is
disactivated, natural recording can be performed.
A gain value for each of the 5 directions is displayed. (The input
level of the microphones cannot be set individually.)
Adjust the microphone input level so that the last 2 bars of the
gain value are not red. (Otherwise, the sound is distorted.) Select
a lower setting for microphone input level.
3Touch [ENTER] to determine the microphone

input level and then touch [EXIT].

GMicrophone input level meter
Function Effect/Setting method
HDCHS250P-VQT1Y31_eng.book 66 ページ 2009年1月20日 火曜日 午前11時18分