Panasonic HDC-SX5PC Connection and recognition, Camera-Computer connection, 119

With a computer

Connection and recognition

Camera–Computer connection

After the software applications are installed, this unit must be connected to the computer and be correctly recognized by the computer.

≥Connect after installing the software applications.

≥Remove the supplied CD-ROM if it is inserted in the computer. (If the [Setup Menu] screen is displayed, wait until it finishes and then remove the CD-ROM.)

≥If the recognition procedure is not accomplished properly, operation will not be possible after connecting the unit to the computer.

≥If the unit fails to operate normally, it may mean that you have not conducted the installation or recognition procedure properly.

≥Be sure to finalize all discs other than DVD-RAM before using them with a computer. Un-finalized discs cannot be recognized by the computer.

1Connect this unit to the AC

adaptor.

≥If a battery is used, operation is not possible when this unit is connected to a computer.

2Insert a disc or card with recorded images in the unit, then turn on the unit.

3Connect this unit and a computer.

≥Insert the plugs as far as they will go. The unit and computer will not operate properly if the plugs are not inserted fully.

≥Do not use any other USB connection cables except the supplied one. (Operation is not guaranteed with any other USB connection cables.)

4Select [PC CONNECT (DISC)] or [PC CONNECT (CARD)] and then

press the cursor button.

This unit is automatically recognized by the computer.

≥When the unit is connected to a computer, the operation mode cannot be changed and its power cannot be turned off.

Disconnect the USB cable, before turning this unit off. (l 121)

≥(STD mode) If the unit is connected to a computer when the USB function is set to [PC CONNECT (DISC)], no image will appear on the LCD monitor or the viewfinder.

≥When this unit is connected to a computer, you cannot use this unit’s DISC EJECT lever to remove a disc.

≥Do not disconnect the USB cable or AC adaptor while the ACCESS/PC lamp is on or

card access icon appears on the LCD monitor. Doing so may damage the data on the disc or card.

≥It may be necessary to reboot the computer after connecting this unit to it for the first time.

AUSB cable (supplied)

The USB function selection screen will appear.

119

VQT1J42