Panasonic HDC-SX5P Zebra display, To return to automatic setting, To cancel the zebra display

Recording

≥A gain value for each of the 2 built-in microphones is displayed. (The input level of the microphones cannot be set individually.)

3Press the cursor button to set and then press the MENU button to finish the setting.

D

DMicrophone input level meter

≥Microphone input level meter is displayed on the screen.

To return to automatic setting

Press the MENU button, then select [VIDEO] > [MIC LEVEL] > [AUTO] and press the cursor button.

≥Adjust the gain value so that the last 2 bars of the microphone input level on the center of the screen are not red. (Otherwise, the sound is distorted.) Select a lower setting for gain value or set [MIC LEVEL] to [AUTO].

≥The microphone input level meter displays the microphone input level for the built-in microphone with the larger volume.

≥When [ZOOM MIC] is [ON], the volume will be different depending on the zoom rate. Set [ZOOM MIC] to [OFF] or set the microphone input level after adjusting the zoom rate.

(l 62)

Zebra display

Displays portions of the image that may be overexposed.

ＨＤ	ＨＤ	ＨＤ	ＨＤ
ＲＡＭ	-ＲＷ	-Ｒ	-Ｒ ＤＬ VIDEO PHOTO

Parts where white saturation (color saturation) is likely to occur (extremely brightly lit or shiny parts) are displayed with diagonal lines (zebra pattern).

¬Rotate the mode dial to select or

.

Press the MENU button, then select [ADVANCED] # [ZEBRA] # [ON] and press the cursor button.

A

AZebra pattern

≥You can record an image with little white saturation if you manually adjust the shutter speed or brightness (iris/gain) (l 77).

To cancel the zebra display

Press the MENU button, then select [ADVANCED] # [ZEBRA] # [OFF] and press the cursor button.

≥The zebra pattern does not appear on the images actually recorded.

72

VQT1J42