Panasonic HDC-SX5P, HDC-SX5PC Disc and card management

93
VQT1J42
Disc and card management
Disc and card
management
Formatting
Please be aware that if a disc is formatted,
then all the data recorded on the disc will be
erased. Store important data on a computer,
etc.
HD mode
¬Rotate the mode dial to select or
and then select the [ ] tab.
STD mode
¬Rotate the mode dial to select or
.
1Press the MENU button, then
select [DISC SETUP] or [SETUP]
# [FORMAT DISC] # [YES] and
press the cursor button.
2(When formatting a DVD-RW in STD mode
only)
Select format type, then press
the cursor button.
3When the confirmation message
appears, select [YES], then press
the cursor button.
≥When formatting is complete, press the MENU
button to exit the message screen.
≥Use this unit to format discs. If a disc is
formatted on other products (such as a
computer), the time spent for recording may
become longer and you may not be able to use
the disc.
≥When using a double sided disc, format each
side.
≥It may not be possible to format a disc with
many scratches or dirt. Such discs cannot be
used.
≥Do not turn this unit off , while formatting.
≥When you format the disc, use a battery with
sufficient battery power or the AC adaptor.
≥Refer to P27 for information about formatting
discs recorded on another device or in another
mode.
Formatting discs
This is for initializing discs.
MENU
VQT1J42ENG.book 93 ページ ２００７年７月２０日 金曜日 午前１０時３６分