109
VQT1J42
With other products
With a DVD recorder or video device
Images are dubbed in standard picture
quality.
Use the AC adaptor to free you from worrying
about the battery running down.
1Connect this unit and a video
device.
AAV cable (supplied)
Insert the plugs as far as they will go.
2Set the mode dial to to turn
on the power.
3Change the video input on the
video device and TV that this unit
is connected to.
The channel set will differ depending on the
terminal to which the unit is connected.
4Start playback on this unit.
5Then start recording on the
connected device.
See the operating instructions of the video
device for details.
To stop dubbing
1) Stop recording on the connected device.
2) Then stop playback on this unit.
If the date and time display and function
indication are not wanted, cancel them before
dubbing. (l49, 100)

Dubbing images onto other

video device

VIDEO PHOTO
If the dubbed images are played back on a
wide-screen TV, the images may be stretched
vertically.
In this case, refer to the operating instruction
of the device you are connecting to or read the
operating instructions of the wide-screen TV
and set the aspect ratio to 16:9.
VQT1J42ENG.book 109 ページ 2007年7月20日 金曜日 午前10時36分