Panasonic HDC-SX5PC Dividing a scene to delete, To continue deleting other scenes

Editing

The selected scene is encircled by a red frame.

≥When the cursor button is pressed again, the scene will be unselected.

≥Up to 99 scenes (HD mode)/8 scenes (STD mode) can be selected in succession.

4 (Only when [SELECT] is selected in step 2)

Press the button.

5When the confirmation message appears, select [YES], then press the cursor button.

(Only when [SELECT] is selected in step 2)

To continue deleting other scenes

Repeat steps 3-5.

To complete editing

Press the MENU button.

≥You can also delete scenes by pressing the MENU button, selecting [EDIT SCENE] # [DELETE] and then selecting [ALL SCENES] (HD mode)/[ALL] (STD mode) or [SELECT].

≥To delete an unwanted part of a scene, divide the scene first, and then delete the unnecessary part. (l 87)

≥Scenes which cannot be played back (the

thumbnails are displayed as [ ]) cannot be deleted.

≥Protected scenes cannot be deleted.

≥Do not open the card slot cover while deleting. The deletion will stop.

≥In case of [ALL SCENES] (HD mode)/[ALL] (STD mode), the deletion may take time if there are many scenes on the disc or SD card.

≥Do not turn off this unit while deleting.

≥When you delete scenes, use a battery with sufficient battery power or use the AC adaptor.

≥If you delete scenes recorded on other products with this unit, all the data related to the scenes may be deleted.

≥It may not be possible to delete scenes that have been divided to approximately 1 second or less in STD mode.

Dividing a scene to delete

This is for dividing a scene into two to delete an unnecessary portion.

ＨＤ	ＨＤ	ＨＤ	ＨＤ
ＲＡＭ	-ＲＷ	-Ｒ	-Ｒ ＤＬ VIDEO

ＲＡＭ -ＲＷ（ＶＲ）

To delete an unnecessary portion of a scene, first divide the scene and then delete the unnecessary portion.

HD mode

¬Rotate the mode dial to select and then select the [ ] or [ ] tab.

STD mode

¬Rotate the mode dial to select .

1Press the MENU button, then select [EDIT SCENE] # [DIVIDE] #

[SET] (HD mode) or [YES] (STD mode) and press the cursor button.

MENU

2Select the scene to be divided, then press the cursor button.

The selected scene is played back.

3When you reach the area where you want to divide the scene, press the cursor button down to set the dividing point.

87

VQT1J42