Panasonic HDC-SX5P Verifying the unit is correctly recognized by the computer, 122, Method

With a computer

Verifying the unit is correctly recognized by the computer

Connect the unit to the computer with a USB cable, select [PC CONNECT (DISC)] or [PC CONNECT (CARD)] on the USB function selection screen and then follow the steps below.

≥With some computers including those made by NEC, the Device Manager may not be displayed if a mode that places restrictions on the functions has been established. Consult the manufacturer or follow the steps in your computer’s operating instructions to establish a mode in which all the functions can be used, then proceed with operation.

1 (When using Windows XP/2000)

Select [start] # ([Settings] #) [Control Panel] # ([Performance and Maintenance] #) [System].

(When using Windows Vista)

Select [start] # [Control Panel] # [System and Maintenance] #

[Device Manager].

2 (When using Windows XP/2000)

Click the [Hardware] tab, then click [Device Manager].

3Verify the following items are displayed.

ªIf the driver has been recognized properly

When using a disc:

≥[MATSHITA HDC-SX5(DVD) USB Device] is displayed at [DVD/CD-ROM drives].

≥[USB Mass Storage Device] is displayed at [Universal Serial Bus controllers].

When using an SD card:

≥[MATSHITA HDC-SX5(SD) USB Device] is displayed at [Disc drives].

≥[USB Mass Storage Device] is displayed at [Universal Serial Bus controllers].

ªIf the driver has not been recognized properly

[!]or [Unknown device] appears at [Universal Serial Bus controllers] or [Other devices], etc. (Where the display will appear depends on the type of computer you are using.)

Use the following method to enable it to be recognized.

Method 1:

Turn off the unit and your computer once and try again.

Method 2:

Eject the disc or SD card and try verifying again.

Method 3:

Try connecting the unit to another USB port on your computer.

122

VQT1J42