Panasonic HDC-SX5P, HDC-SX5PC Wind noise reduction function, Microphone level

71
VQT1J42
Recording
¬Rotate the mode dial to select or
.
Press the MENU button, then select
[VIDEO] (HD mode) or [ADVANCED]
(STD mode) # [WIND CUT] # [ON]
and press the cursor button.
To cancel the wind noise reduction
function
Press the MENU button, then select [VIDEO]
(HD mode) or [ADVANCED] (STD mode) #
[WIND CUT] # [OFF] and press the cursor
button.
≥This function’s default setting is [ON].
≥The wind noise reduction depends on the wind
strength. (The stereo effect may be reduced if
this function is activated in strong winds.
However, the stereo effect is automatically
restored when then the wind weakens.)
When recording, the input level from the built-in
microphones and the external microphone
terminal can be adjusted.
¬Rotate the mode dial to select or
.
1Press the MENU button, then
select [VIDEO] > [MIC LEVEL]
> [SETrAGC] or [SET] and
press the cursor button.
AGC: Auto Gain Control
[AUTO]: AGC is activated, and the
recording level is adjusted
automatically.
[SETrAGC]: The desired recording level can
be set. AGC will also be
activated to reduce the amount
of sound distortion.
[SET]: AGC is not activated and so
natural recording can be
performed.
2Move the cursor button left or
right to adjust the microphone
input level.
ALeft
BRight
CMicrophone input level
Wind noise reduction function
This is for reducing the wind noise
coming into the microphone when
recording.
VIDEO
MENU
Microphone level
This is for adjusting the microphone
input level.
VIDEO
MENU
VQT1J42ENG.book 71 ページ ２００７年７月２０日 金曜日 午前１０時３６分