Operating with the remote control | Panasonic HDC-SX5PC instruction

Playback

≥Sound will be heard only during normal playback.

≥If pause play is continued for 5 minutes, the screen returns to the thumbnails.

≥When the amount of time recorded on the scene is too short, playback may not be possible.

≥Scenes which cannot be displayed as thumbnails (the thumbnails are displayed as

[ ]) cannot be played back.

(HD mode) An error message appears and the screen shows the thumbnails.

≥The power will not turn off when the LCD monitor and the viewfinder are closed and retracted.

≥The date/time displayed may be different from the recording date/time and it may take time to display the thumbnail display when playing back motion pictures not recorded on this unit.

≥(HD mode) The remaining time for playback indication will be reset to “0h00m00s” each scene.

≥The high definition picture quality video signals that can be played back on this unit are 1920k1080/60i or 1440k1080/60i.

≥(HD mode) This unit may degrade or not playback motion pictures recorded or created on other products, and other products may degrade or not playback motion pictures recorded on this unit, even if the products support AVCHD.

≥(HD mode) If you continuously record motion picture data that exceeds 4 GB on an SD card and then play back the data on another device, the picture may momentarily stop where the data has reached 4 GB.

≥If motion pictures recorded on another device with a 4:3 aspect ratio are played back on this unit in STD mode, the images on the LCD monitor and the viewfinder are squeezed vertically.

Fast forward/rewind playback

Move the cursor button right during playback.

(Move the cursor button left to rewind.)

Move the cursor button again to increase the speed. (The screen display changes from 5 to .)

≥Normal playback is restored when you move the cursor button up.

ªOperating with the remote control

Press the 6 or 5 button during playback.

SEARCH PLAY SEARCH

STILL ADV PAUSE STILL ADV

SKIP STOP SKIP

Skip playback (to the start of a scene)

(Operation is possible with the remote control only.)

Press the : or 9 button on the remote control during playback.