Panasonic HDC-SX5PC Disc protection setting, To release the disc protection

Disc and card management

¬Rotate the mode dial to select or

and then select the [ ] tab.

Press the MENU button, then select [DISC SETUP] or [SETUP] # [AUTO PROTECT] # [ON] and press the cursor button.

MENU

≥This function’s default setting is [ON].

≥We recommend that the auto protect function is set to [ON] in order to prevent accidental deletion on other devices. If discs recorded on this unit are inserted into other devices without protecting them, a message may be displayed prompting you to format the disc. If the disc is formatted, the data on it will be erased, and the process cannot be reversed.

≥If a disc with no recorded motion pictures is ejected, it will not be protected.

ªTo release the disc protection

Erase all the motion pictures on the disc or format the disc.

≥Please be aware that if a disc is formatted, then all the data recorded will be erased and cannot be recovered.

≥The disc will need to be re-formatted on the device you will use.

Disc protection setting

ＲＡＭ -ＲＷ（ＶＲ）

This is for preventing recorded contents from being deleted or edited by mistake.

Further recording and editing is not possible on protected discs until the protection is released.

¬Rotate the mode dial to select .

1Press the MENU button, then select [DISC SETUP] #

[DISC PROTECT] and press the cursor button.

MENU

2When the confirmation message appears, select [YES], then press the cursor button.

To release disc protection

1)Press the MENU button, then select [DISC SETUP] # [DISC PROTECT] and press the cursor button.

2)When the confirmation message appears, select [YES], then press the cursor button.

≥If the disc has been protected on another device, it may not be possible to release the protection on this unit. In this case, release the protection on the device that you used to protect it.

98

VQT1J42