Recording

PRE-REC function

This prevents you missing a shot.

VIDEO

This allows recording of the pictures and sound to start approximately 3 seconds before the recording start/stop button is pressed so you can capture moments you would otherwise have missed.

¬When the mode dial is set to and an SD card is inserted in this unit.

1Open the LCD monitor or extend the viewfinder.

2Press the PRE-REC button.

The indication appears.

Aim this unit at the subject and position it securely.

Recording of the pictures and sound starts approximately 3 seconds before the recording start/stop button is pressed.

3Press the recording start/stop button to start recording.

There is no beep sound.

After recording starts, the PRE-REC setting is canceled.

To end PRE-REC

PRE-REC is also ended if you press the PRE-REC button in PRE-REC.

PRE-REC is canceled in the following cases. jIf you operate the mode dial.

jIf you turn the unit off.

jIf you open the card slot cover. jIf you press the MENU button. jIn quick start standby mode.

When the remaining time left for recording motion pictures is less than 1 minute, PRE-REC cannot be set.

If you start recording less than 3 seconds after pressing the PRE-REC button, the PRE-REC function is not activated and the pictures are recorded normally.

When the recording start/stop button is pressed, image shake and operation sound may be recorded.

55

VQT1J42

Page 55
Image 55
Panasonic HDC-SX5PC operating instructions PRE-REC function, This prevents you missing a shot, To end PRE-REC