Ink film, Installing the ink film | Panasonic KX-FP143HK instruction

1. Introduction and Installation

1.5 Ink film

1.5.1 Installing the ink film

1Open the front cover by pulling up the centre part.

2Release the back cover by pushing the green button (1).

3Open the back cover.

4Insert the front ink film roll by inserting its blue gear (1) into the left slot of the unit (2). Insert the rear ink film roll (3).

L The ink film is safe to touch, and will not rub off on your hands like carbon paper.

LMake sure the blue gear (1) and white gear (4) are installed as shown.

5Turn the blue gear (1) in the direction of the arrow until the ink film is tight (2).

Page 11

Image 11

Panasonic KX-FP143HK operating instructions Ink film, Installing the ink film

Contents

Operating Instructions Open How to use the operating instructions Keys Listed in alphabetical order Location of Controls Copyright Thank you for purchasing a Panasonic fax machineFor your future reference Wet locations Important safety instructionsInstallation Never install telephone wiring during a Lightning storm For best performance On another fax machine Directory Quantity Specifications Included accessories Film again Accessory informationAvailable accessories Model No Specifications/Usage Description of buttons Overview Ink film Installing the ink film Turn Tight Replacing the ink film Connect the handset cord Handset cordPaper tray Recording paper Push the tension plate back SET Help ConnectionsHelp function Monitor volume Adjusting volume Date and timeRinger volume Handset receiver volume To select characters with the dial keypad Keys Characters Your logoTo correct a mistake Stop Menu Mute Insert button To select characters using a or BKeys Characters Hyphen button Example +234 Your fax numberStop Menu Your FAX no Press SET Helpful hints Editing a stored itemErasing a stored item Stop Menu How Caller ID is displayed Making a phone call using the navigator directoryCaller ID service To confirm caller information using the Caller ID list To change the display of the caller information Viewing and calling back using caller informationCalling back will not be possible in the following cases Stop Monitor FAX/START SET Erasing specific caller information Editing a caller’s telephone number before calling backErasing all caller information Storing caller information into the navigator directory This feature is not available in the following cases FAX/START Monitor Sending a fax manuallyRedial Documents you can send Adding a new item into the broadcast memory Sending a fax using the navigator directoryBroadcast transmission Programming items into the broadcast memory To send the same document to a one-time group of parties To cancel broadcast transmissionErasing a stored item from the broadcast memory Sending the same document to pre-programmed parties With answering machine Selecting the way to use your fax machineUse only as a fax Mostly phone calls Stop FAX/START Activating TEL modeReceiving a fax manually Auto Answer OFF Auto Answer indicator turns on Using the unit with an answering machineActivating FAX only mode FAX only Mode To erase a programmed phone number Black list functionReceiving a voice message and fax document in one call Press Menu Press # then Press a or B to select on Press SET Using with the ring detection featureSET Menu Stop Start More copying featuresMaking a copy Collated pages Uncollated pages To collate multiple copiesExample Making 2 copies of a 4-page original document Programming Programming basic featuresProgramming advanced features To cancel programming Advanced features Basic features Code #34 Setting the quick scan Code #26 Setting the Caller ID list to print automaticallyCode #27 Setting the black list function Code #31 Activating the Distinctive Ring feature Code #76 Setting the connecting tone Code #46 Setting friendly receptionCode #58 Setting the original mode Code #68 Setting the Error Correction Mode ECM Program code and direct command button Direct commands for programming features #46 Friendly reception #58 Original mode#76 Connecting tone #80 Reset advanced features Error messages Display Error messages Reports Cover Open Modem ErrorPolling Error Close Tension Plate General When a function does not work, check hereInitial settings Fax receiving Fax sending Copying Using an answering machineIf a power failure occurs Display will show the following When the recording paper has jammed in the unitRecording paper jams Correct When the recording paper was not fed into the unit properly Open the back cover Recording paper feeder cleaningDocument jams sending Open the recording paper feeder cover Document feeder/scanner glass cleaningDo not use paper products, such as paper towels or tissues Thermal head cleaning Help Reference lists and reports Technical data about this product Recording paper size Paper specifications Index Index Page Page Page PFQX2002ZA CM1203DH0 Panasonic Communications Malaysia Sdn. Bhd