7. Programmable Features
9.Enter the transmission start time.
10.Press {SET}.
11.Press {MENU}.
Note:
LTo cancel after programming, press {STOP} then {SET}.
Code #26: Setting the Caller ID list to print automatically
AUTO CALL. LIST
=OFF [±]
“ON”: The unit will print the Caller ID list automatically after every 30 new calls (page 19). “OFF” (default): The unit will not print the Caller ID list, but keep records of the information for the last 30 callers.
Code #27: Setting the black list function
BLACK LIST
=OFF [±]
See page 30 for details.
Code #31: Activating the Distinctive Ring feature
DISTINCTIVE RING
=OFF [±]
See page 31 for details.
Code #34: Setting the quick scan
QUICK SCAN
=OFF [±]
This feature is helpful when you want to remove the document for other uses, because the unit will release the document before sending or copying.
“ON”: The unit will scan the document and store it into memory first, then the unit will start sending or copying.
“OFF” (default): Deactivates this feature.
Note:
LIf the document exceeds the memory capacity, sending of the whole document or copying of the exceeded document will be cancelled and this feature will be turned OFF automatically.
Code #36: Receiving oversized documents
RCV REDUCTION
=92% [±]
If the size of the document sent by the other party is as large as, or larger than the recording paper, the unit can reduce the document and print it. Select the desired reduction rate.
Setting | Recording | Original |
| paper size | document |
|
| size |
100% | A4 | Letter |
|
|
|
92% | A4 | A4 |
(default) |
|
|
|
|
|
86% | A4 | A4 |
|
|
|
72% | A4 | Legal |
|
|
|
Code #39: Changing the display contrast
LCD CONTRAST
=NORMAL [±]
“NORMAL” (default): For normal contrast.
“DARKER”: Used when the display contrast is too light.
Code #41: Changing the fax activation code
FAX ACTIVATION
=ON[±]
If you use an extension telephone and wish to use it to receive a fax, activate this feature and program the activation code.
1.Press {MENU}.
2.Press {#}, then {4}{1}.
3.Press {A} or {B} repeatedly to select “ON”.
4.Press {SET}.
5.Enter your code from 2 to 4 digits, using
L The default code is “@@@9”. L Do not enter “0000”.
6.Press {SET}.
7.Press {MENU}.
Note:
LThis code is also used to receive a voice message and a fax in the same call (page 30).
Code #44: Setting the memory reception alert
RECEIVE ALERT
=ON[±]
To alert you with a beeping sound when a received fax document is stored into memory due to some existing problem.
The slow beeps will continue until you clear the printing problem and make sure the unit is supplied with enough paper to print the stored document.
“ON” (default): You will be alerted to a reception problem by a beeping sound.
“OFF”: Deactivates this feature.
36
