Check Paper

8. Help

8Close the back cover securely by pushing down on the notched area at both ends (1).

9Close the front cover securely.

10 Install the paper tray (page 11), then insert the recording paper (page 11).

8.4.2When the recording paper was not fed into the unit properly

The display will show the following.

Remove the recording paper and straighten. Pull the tension plate forward (1) and insert the paper. Push the tension plate back, then press {START} to clear the message.

{START}

Page 49

Image 49

Panasonic KX-FP143HK operating instructions When the recording paper was not fed into the unit properly, Check Paper

Contents

Operating Instructions Open How to use the operating instructions Keys Listed in alphabetical order Location of Controls For your future reference Thank you for purchasing a Panasonic fax machineCopyright Installation Important safety instructionsNever install telephone wiring during a Lightning storm Wet locations For best performance On another fax machine Directory Quantity Specifications Included accessories Available accessories Accessory informationModel No Specifications/Usage Film again Description of buttons Overview Ink film Installing the ink film Turn Tight Replacing the ink film Paper tray Handset cordRecording paper Connect the handset cord Push the tension plate back Help function ConnectionsSET Help Ringer volume Adjusting volume Date and timeHandset receiver volume Monitor volume To correct a mistake Your logoStop Menu Mute To select characters with the dial keypad Keys Characters Keys Characters To select characters using a or BHyphen button Insert button Stop Menu Your fax numberYour FAX no Press SET Example +234 Erasing a stored item Editing a stored itemStop Menu Helpful hints Caller ID service Making a phone call using the navigator directoryTo confirm caller information using the Caller ID list How Caller ID is displayed Calling back will not be possible in the following cases Viewing and calling back using caller informationStop Monitor FAX/START SET To change the display of the caller information Erasing all caller information Editing a caller’s telephone number before calling backErasing specific caller information Storing caller information into the navigator directory This feature is not available in the following cases Redial Sending a fax manuallyFAX/START Monitor Documents you can send Broadcast transmission Sending a fax using the navigator directoryProgramming items into the broadcast memory Adding a new item into the broadcast memory Erasing a stored item from the broadcast memory To cancel broadcast transmissionSending the same document to pre-programmed parties To send the same document to a one-time group of parties Use only as a fax Selecting the way to use your fax machineMostly phone calls With answering machine Receiving a fax manually Auto Answer OFF Activating TEL modeStop FAX/START Activating FAX only mode Using the unit with an answering machineFAX only Mode Auto Answer indicator turns on Receiving a voice message and fax document in one call Black list functionTo erase a programmed phone number SET Menu Using with the ring detection featurePress Menu Press # then Press a or B to select on Press SET Making a copy More copying featuresStop Start Example Making 2 copies of a 4-page original document To collate multiple copiesCollated pages Uncollated pages Programming advanced features Programming basic featuresTo cancel programming Programming Advanced features Basic features Code #27 Setting the black list function Code #26 Setting the Caller ID list to print automaticallyCode #31 Activating the Distinctive Ring feature Code #34 Setting the quick scan Code #58 Setting the original mode Code #46 Setting friendly receptionCode #68 Setting the Error Correction Mode ECM Code #76 Setting the connecting tone Program code and direct command button Direct commands for programming features #76 Connecting tone #58 Original mode#80 Reset advanced features #46 Friendly reception Error messages Display Error messages Reports Polling Error Modem ErrorClose Tension Plate Cover Open Initial settings When a function does not work, check hereGeneral Fax receiving Fax sending If a power failure occurs Using an answering machineCopying Recording paper jams When the recording paper has jammed in the unitDisplay will show the following Correct When the recording paper was not fed into the unit properly Document jams sending Recording paper feeder cleaningOpen the back cover Do not use paper products, such as paper towels or tissues Document feeder/scanner glass cleaningOpen the recording paper feeder cover Thermal head cleaning Help Reference lists and reports Technical data about this product Recording paper size Paper specifications Index Index Page Page Page PFQX2002ZA CM1203DH0 Panasonic Communications Malaysia Sdn. Bhd

Panasonic KX-FP143HK When the recording paper was not fed into the unit properly, Check Paper

Models: KX-FP143HK

8.4.2When the recording paper was not fed into the unit properly

The display will show the following.

CHECK PAPER