6. Copy
6.1 Making a copy
1
2
{STOP}
{START}
{COPY} {>}{A}{B}
1Adjust the width of the document guides (1) to fit the actual size of the document.
2Insert the document (up to 10 pages) FACE DOWN (2) until a single beep is heard and the unit grasps the document.
L If the document guides are not adjusted to fit the document,
3If necessary, press {A} or {B} repeatedly to select the desired resolution.
4Press {COPY}.
LIf necessary, enter the number of copies (up to 30).
5Press {START}, or wait for 15 seconds. L The unit will start copying.
Note:
LAny transmittable document can be copied (page 24).
To select the resolution
Select the desired resolution according to the type of document.
–“FINE”: For printed or typewritten originals with small printing.
–“SUPER FINE”: For originals with very small printing.
–“PHOTO”: For originals containing photographs, shaded drawings, etc.
LIf you select “STANDARD”, copying will be done using “FINE” mode.
Quick scan feature
This feature is helpful when you want to copy the document, then remove it for other uses. To use this feature, activate feature #34 (page 36) beforehand.
LThe document will be fed into the unit and scanned into memory. The unit will then print the data.
If the document exceeds the memory capacity, copying of the exceeded document will be cancelled and this feature will be turned OFF automatically.
To stop copying
Press {STOP}.
6.1.1 More copying features
To enlarge a document
1.Insert the document, then press {COPY}.
2.Press {>}.
3.Press {A} repeatedly to select “150%” or “200%”, then press {START}.
L The unit will only enlarge the centre of the upper part of the document. To make an enlarged copy of the bottom of the document, turn the document around, and then make a copy.
Example: 150% enlarged copy
Original document | Enlarged copy | ||||||||
|
| A | B |
|
|
| A | B |
|
|
| C | D |
|
|
| C | D |
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
To reduce a document
1.Insert the document, then press {COPY}.
2.Press {>}.
3.Press {B} repeatedly to select “92%”, “86%” or “72%”, then press {START}.
Setting | Recording | Original |
| paper size | document |
|
| size |
100% | A4 | A4, Letter |
(default) |
|
|
|
|
|
92% | A4 | A4 |
|
|
|
86% | A4 | A4 |
|
|
|
72% | A4 | Legal |
|
|
|
32
