3. Telephone
Display while viewing
LWhen the unit could not receive a name, the display will show “NO NAME RCVD”.
LWhen no calls have been received, the display will show “NO CALLER DATA”.
To stop viewing
Press {STOP} after step 2 on page 20.
3.4.1Editing a caller’s telephone number before calling back
1Press {CALLER ID}.
2Press {A} or {B} repeatedly to display the desired item.
3Press {CALLER ID} to display the telephone number.
4To insert a number in front of the telephone number, press the desired dial key (0 to 9). L You can also initiate the editing mode by
pressing {*}.
5Press {MONITOR} or lift the handset to call back the edited number.
L The unit will start dialling automatically. L To send a fax, insert the document FACE
DOWN and press {FAX/START}.
Note:
LThe edited telephone number will not be saved in the caller information. To save in the navigator directory, see page 22.
To correct a mistake
1.Press {<} or {>} to move the cursor to the incorrect number.
2.Press {STOP} to delete the number.
3.Enter the correct number.
To delete a number
Press {<} or {>} to move the cursor to the number you want to delete and press {STOP}.
To insert a number
1.Press {<} or {>} to move the cursor to the position to the right of where you want to insert the number.
2.Enter the number.
3.4.2Erasing all caller information
1Press {MENU} repeatedly to display “CALLER SETUP”.
2Press {SET}.
3Press {SET}.
LTo cancel erasing, press {STOP} 3 times.
4Press {SET}.
5Press {STOP}.
3.4.3Erasing specific caller information
1Press {CALLER ID}.
2Press {A} or {B} repeatedly to display the desired item.
3Press {<}.
LTo cancel erasing, press {STOP} 2 times.
4Press {SET}.
LTo erase other items, repeat step 2 to 4.
5Press {STOP}.
21
