Ò

To connect a computer directly to the KX-HGW200:

Note:

If using an Ethernet connection, an Ethernet card and software have to be installed properly on the computer first.

1 Make sure the computer is turned off.

2 Set the HUB/PC switch on the KX-HGW200 to PC.

PC

HUB

HUB/PC switch

To RJ-45 jack on the cable/xDSL

modem

3

Connect the category 5 straight cable to

TO COMPUTER/ETHERNET HUB port of the KX-HGW200.

TO COMPUTER/

ETHERNET HUB port

Installation

4 Connect the other end of the category 5 straight cable to the LAN port of the computer.

LAN port

Category 5 straight cable

To TO COMPUTER/ ETHERNET HUB port

of the KX-HGW200

Computer (Rear Side)

For assistance, please call: 1-800-272-7033

17

Page 17
Image 17
Panasonic manual To connect a computer directly to the KX-HGW200