Panasonic Connecting the KX-HGW200 to a Home Network, To connect computers using the HomePNA

Ò

Connecting the KX-HGW200 to a Home Network

To connect computers using the HomePNA:

Note:

For using HomePNA:

³A HomePNA card and software have to be installed properly on the computer first.

³To avoid interference with the HomePNA signals, do not use an ADSL filter, which may have been provided by your phone company, on the telephone line or on the line that runs in between the telephone jack and computer. If you have two lines installed and one of them is dedicated to phone use, you can use the ADSL filter on that phone line only.

³Use the telephone line that does not have the ADSL filter for your HomePNA connection.

1 Make sure the computer is turned off.

2 Connect the telephone line cord (included accessory) to the LINE jack on the KX-HGW200.

Connect the other end of the telephone line cord to the wall mounted single-line telephone jack.

Telephone line cord

(included accessory)

LINE jack

Single-line telephone jack (RJ11C)

To RJ-45 jack on the cable/xDSL modem

Installation

For assistance, please call: 1-800-272-7033

(Continued Ò)

15