Link to Cell
Link to cell feature
You can connect your base unit and cellular phone using Bluetooth wireless technology, so that you can make or answer cellular calls using your phone system.
This allows you to:
–use the unit to talk on cellular calls even if some areas of your home have poor cellular reception, simply by placing your cellular phone in an area with good reception.
–talk on cellular calls even if your cellular phone is in your pocket or bag.
–enjoy cordless cellular calls even if your cellular phone plugged in and charging.
Important:
RYou may pair a maximum of 2 cellular phones. However, the base unit allows only one Bluetooth to be active at a time.
RThe unit may not function properly with your Bluetooth device’s phone app depending on your Bluetooth device model, the devices connected to your Bluetooth device, and the apps installed on your Bluetooth device.
RYour cellular phone must support the Hands Free Profile (HFP) specification.
Pairing a cellular phone
Important:
RFor more details and the list of compatible cellular phones, please visit our Web site: http://www.panasonic.com/link2cell
RBefore pairing a Bluetooth enabled cellular phone to the base unit, make sure that no other Bluetooth device is connected to your cellular phone.
1Handset:
For CELL 1: MMENUN (right soft key) #6241
For CELL 2: MMENUN (right soft key) #6242
R After the corresponding CELL indicator on the base unit starts flashing, the rest of the procedure must be completed within 5 minutes.
2Your cellular phone:
While the corresponding CELL indicator is flashing, follow the instructions of your cellular phone to enter the pairing mode. R Depending on your cellular phone, it may ask you to enter the Bluetooth PIN (default: “0000”). If your cellular
phone shows PassKey confirmation on its display, follow the directions to proceed.
3Handset:
Wait until a long beep sounds.
R It may take more than 10 seconds to complete pairing.
R When the corresponding CELL indicator lights up, the cellular phone is connected to the base unit. You are ready to make cellular calls.
4MOFFN
Note:
RMake sure that your cellular phone is set to connect to this product automatically. Refer to your cellular phone’s operating instructions.
RMake sure you cancel your cellular phone’s current pairing if you want to pair it to the other line (page 17).
RThe default setting for the text message alert feature is “On(no announce)”, so when you pair your cellular phone to the base unit, this feature may be activated (page 49). (This depends on the version and type of cellular phone you are using.)
Unpairing a cellular phone
You can cancel the pairing of a cellular phone that is stored in the base unit.
1For CELL 1: MMENUN (right soft key) #6111
For CELL 2: MMENUN (right soft key) #6112
2MbN: “Yes” a MSELECTN
R When the cellular phone is unpaired, the CELL indicator is turned off.
3MOFFN
For assistance, please visit http://www.panasonic.com/help | 17 |
