Link to Cell
range. You can set the interval. The default setting is “1 min”.
Important:
RWhen you are using a cellular line, the base unit loses its connection from other Bluetooth devices (cellular phone). To automatically resume the connection to cellular phones, leave the auto connection on.
RSome cellular phones lose connection after usage, please check the specifications of your cellular phone for more details.
1MMENUN (right soft key) #632
2 MbN: Select the desired setting.
3 MSAVEN a MOFFN
Note:
RSome cellular phones may ask you if you accept the connection requirement from the base unit. In that case, select “Off” in step 2. Check the specifications of your cellular phone.
Connecting/disconnecting the cellular phone manually
If you will not be using the paired cellular phone’s link to cell feature temporarily (for example, you do not want the unit to ring when your cellular line receives a call), you can disconnect your cellular phone from the base unit. If you want to use it again, reconnect the cellular phone to the base unit.
Note:
REven if a paired cellular phone was disconnected from the base unit, if it is brought within the base unit’s range during the auto connection interval, it may automatically connect to the base unit (page 18).
RA disconnected cellular phone is not unpaired from the base unit, so pairing it to the base unit again is unnecessary.
Base unit
You can search for a cellular phone that is paired to the base unit and connect to it easily.
Important:
RThis feature is available when Bluetooth is not in use and neither the cellular phone nor the unit are talking on a call.
Press M
N and wait for a few seconds for the
cellular phone and base unit to connect to each other.
Handset
1To connect/disconnect:
For CELL 1: MMENUN (right soft key) #6251
For CELL 2: MMENUN (right soft key) #6252
R A long beep sounds.
2MOFFN
Cellular line only mode (If you do not use the landline)
If you do not use the landline, we recommend setting the unit to the cellular line only mode.
Important:
RIf you turn on the “Cell line only mode”, disconnect the telephone line cord from the base unit. Otherwise the “Cell line only mode” cannot be activated.
1MMENUN (right soft key) #157
2To turn on:
MbN: “On” a MSELECTN a
MbN: “Yes” a MSELECTN
To turn off:
MbN: “Off” a MSELECTN
Note:
ROnce you set this mode, you can use the following buttons to make cellular calls for
the handset, press M
N or MZN instead of MCELLN (page 21).
ROnce you set this mode, the following features cannot be used:
–Landline features (page 38)
–Answering system (page 51) Messages cannot be received.
–Voice mail features (page 58)
RAfter this mode is turned on or off, the base unit reboots.
For assistance, please visit http://www.panasonic.com/help | 19 |
