Panasonic KX-PRL262, KX-PRD262 Silent mode, Call block, Turning silent mode on/off

Programming

9MbN: Select the desired snooze setting. a MSAVEN

10MSELECTN a MOFFN

Note:

RPress MSTOPN to stop the alarm completely.

RWhen the handset is in use, the alarm will not sound until the handset is in standby mode.

RPress any dial key, M N, or MSNOOZEN to stop the sound but keep the snooze function activated.

RIf you want to make an outside call when the snooze function is activated, please stop the snooze function before making the call.

Silent mode

Silent mode allows you to select a period of time during which the handset will not ring for outside calls. This feature is useful for time periods when you do not want to be disturbed, for example, while sleeping. Silent mode can be set for each unit.

Using the phonebook’s group feature (page 28), you can also select groups of callers whose calls override silent mode and ring the handset (Caller ID subscribers only).

Important:

RMake sure the unit’s date and time setting is correct (page 15).

RWe recommend turning the base unit ringer off (page 34, 35) in addition to turning the silent mode on.

RIf you have set the alarm, the alarm sounds even if the silent mode is turned on.

Turning silent mode on/off

1MMENUN (right soft key) #238

2MbN: Select the desired setting. a

MSAVEN

R If you select “Off”, press MOFFN to exit.

3Enter the desired hour and minute you wish to start this feature.

4*: Select “AM” or “PM”. a MOKN

5Enter the desired hour and minute you wish to end this feature.

6*: Select “AM” or “PM”.

7 MSAVEN a MOFFN

Changing the start and end time

1MMENUN (right soft key) #237

2Continue from step 3, “Turning silent mode on/off”, page 40.

Selecting groups to bypass silent mode

1MMENUN (right soft key) #241

2Select your desired groups by pressing 1 to 9.

R “ ” is displayed next to the selected group numbers.

R To cancel a selected group, press the same dial key again. “ ” disappears.

3MSAVEN a MOFFN

Call block

This feature rejects calls from unwanted callers (Caller ID subscribers only). The following items are available when storing phone numbers in the call block list (250 max.).

–“Block a single number”: The unit can reject calls from specific phone numbers.

–“Block range of numbers”: The unit

can reject calls that begin with a number stored in the call block list, such as a toll-free phone number prefix or certain area codes.

You can also set the unit to reject calls that do not have a phone number.

When a call is received, the unit rings briefly*1 while caller information is being received. If the caller’s phone number matches an entry in the call block list, the unit emits no sound to the caller, and disconnects the call.

*1 This is called first ring. If you do not want the first ring to sound, turn this setting to “Off” (page 41).

40For assistance, please visit http://www.panasonic.com/help