Answering System for Landline
Answering system for landline
The answering system can answer and record calls for you when you are unavailable to answer the phone.
You can also set the unit to play a greeting message but not to record caller messages by selecting “Greeting only” as the recording time setting (page 56).
Important:
RMake sure the unit’s date and time setting is correct (page 15).
Memory capacity (including your greeting message)
The total recording capacity is about 18 minutes. A maximum of 64 messages can be recorded.
Note:
RWhen message memory is full:
–“Messages full” is shown briefly on the handset display.
–The 
indicator on the base unit flashes quickly. (If there are new messages recorded, the indicator flashes slowly until you have listened to the new messages.)
–If you use the
–If you recorded your own greeting message, the same message is still announced to callers even though their messages are not recorded.
Turning the answering system on/off
1To turn on:
MMENUN (right soft key) #327
To turn off:
MMENUN (right soft key) #328
2MOFFN
Note:
RWhen the answering system is turned on,
–
is displayed on the handset.
–
indicator on the base unit lights up.
Greeting message
When the unit answers a call, a greeting message is played to callers.
You can use either:
–your own greeting message
–a
Recording your greeting message
1MMENUN (right soft key) #302
2 MbN: “Yes” a MSELECTN
3After a beep sounds, hold the handset about 20 cm (8 inches) away and speak clearly into the microphone (2 minutes max.).
4Press MSTOPN to stop recording. a
MOFFN
Using a pre-recorded greeting message
The unit provides 2
–If you erase or do not record your own greeting message, the unit plays a
–If the message recording time (page 56) is set to “Greeting only”, callers’ messages are not recorded and the unit plays a different
Resetting to a pre-recorded greeting message
If you want to use a
For assistance, please visit http://www.panasonic.com/help | 51 |
