Link to Cell
Link to cell settings
Selecting which unit receives cellular calls
You can select which unit rings and receives calls for a cellular line. When “All” is selected, all handsets and the base unit ring.
1For CELL 1: MMENUN (right soft key) #6271
For CELL 2: MMENUN (right soft key) #6272
2MbN: Select the desired handset or “All”. a MSAVEN
3MOFFN
Note:
RWhen you select a specific handset to receive calls for a cellular line:
–other handsets cannot answer the calls.
–the base unit can answer the calls even though it does not ring. However, you can make the base unit ring by adjusting the base unit ringer volume (page 34).
RWhen you change the setting to “All”, the base unit ringer volume also returns to the lowest level even if the ringer volume has been changed.
RThe units selected with this setting have the text message alert feature (page 49) applied to them.
Ring as cell mode
Once this feature is turned on, the handset and base unit ring using the same ringer tone as your cellular phone.
The following settings are available:
–“Off”: Turn this feature off to use the ringer tones of the handset and base unit. Caller information is announced depending on the Talking Caller ID setting (page 36).
–“On (with Talking CID)” (default): The handset and base unit use your cellular phone’s ringer tone. Caller information is announced even if the Talking Caller ID is turned off.
–“On (without Talking CID)”: The handset and base unit use your cellular
phone’s ringer tone. Caller information is not announced even if the Talking Caller ID is turned on.
Important:
RTo use this feature, your cellular phone must support Bluetooth
1For CELL 1: MMENUN (right soft key) #6141
For CELL 2: MMENUN (right soft key) #6142
2MbN: Select the desired setting.
3 MSAVEN a MOFFN
Note:
RThe units use the preset ringer tones (page 35) instead of your cellular phone’s ringer tone when a cellular call is being received if:
–your cellular phone is in silent mode (depending on your cellular phone).
–the base unit is in use.
–2 handsets are sharing a landline call.
RIf your cellular phone is in silent mode with “On (with Talking CID)” set, the unit announces caller information even when Talking Caller ID is turned off (page 36).
To use the handset ringer tone instead of your cellular phone’s ringer tone
Select “Off” in step 2, “Ring as cell mode”, page 18.
To change the handset ringer tone for a cellular line, see page 34.
Auto connection to the Bluetooth devices (cellular phones)
After pairing, your Bluetooth devices are connected to the base unit. If you move the Bluetooth devices out of base unit range, the Bluetooth devices are disconnected from the base unit. This feature allows the base unit to try to reconnect the cellular phone at regular intervals when it returns within base unit
18For assistance, please visit http://www.panasonic.com/help
