Panasonic PT-LB50NTE manual Useful Functions, Secondary display transmission

Useful Functions (cont.)

Secondary display transmission

You can set the computer screen and the projector screen to the multi-monitor mode, and use the computer screen as the primary monitor and the projector screen as the secondary monitor.

1Click [] on the launcher.

2Check the status indication on the launcher to make sure that transmission is possible (check that the green lamp is lit).

3Click [] or [] on the launcher.

The secondary screen on the computer is projected.

•Like the normal multi-monitor function, you can change the relative positions of the primary monitor (computer screen) and the secondary monitor (projector screen) by using [Display Properties] (right-click on the desktop of the computer screen).

•It is impossible to send images to the secondary monitor by the selective area transmission (See page 35).

•The one shot function is not available when the secondary display transmission is activated.

•If the computer has been set to the multi-monitor mode, the monitor for the display switch-over function will be displayed as the third monitor in [Display Properties] of Windows.

Quitting secondary display transmission

Click [] on the launcher again.

36