Connect (cont.)
Other operations for connection
Operations when password entry is required for connection
When a projector with the [ ] mark is selected, the window shown to the right appears. Enter the password and click [OK]. (See page 47)
•Click [CANCEL] at the password entry window to return to launcher (See page 23).
•When an incorrect password is entered, an error message appears. Click [OK] to return to the password entry window and enter the correct password again.
Adding and deleting connections
When [Network] is set to [U] and the desired projector is not displayed at the “Select Access port” window, connections can be added and deleted by the following operations.
Adding a connection
1Click [Designate] at the “Select Access Port”
window.
The window shown to the right appears.
2Click [ADD] and enter the IP address※
(including its periods) of the connection to be added, and then click [REGISTER].
※“Glossary” (See page 61)
The newly registered connection is added to the connection list in the window shown in step 1.
Deleting a connection
Select the connection to be deleted at the window shown in step 1 and click [DELETE].
20
