Panasonic PT-LB50NTE manual Return Cancel

NONE

WEP※

TKIP※

AES※

Network setting of the projector (cont.)

ENCRYPTION : Select the encryption method to be used for communication between the projector and the network.

: Select when transmit without encryption. It is selectable only when [AUTHENTICATION] is [OPEN] or [SHARED].

: Select when ENCRYPTION is WEP.

: Select when ENCRYPTION is TKIP.

Selectable when [AUTHENTICATION] is [WPA-PSK].

: Select when ENCRYPTION is AES.

Selectable when [AUTHENTICATION] is [WPA-PSK].

Additionally perform the following setting using the [AUTHENTICATION] setting.

DETAILED SETUP

SELECT

CANCEL

	USER1		3/3
DEFAULT KEY			1
KEY1			********
KEY2			********
KEY3			********
KEY4			********
	RETURN			CANCEL
		OK

When setting [OPEN] or [SHARED] as authentication and setting [WEP] as the encryption method:

DEFAULT KEY : Set 1 – 4 numerals for the default key.

KEY 1 – 4 : Set these to match the WEP key registered in [DEFAULT KEY]. Either the 64-bit or 128-bit WEP key can be set. For the 64-bit key, input five alphanumerics (or a 10-digit string for the hexadecimal format) for the 128-bit key, input 13 alphanumerics (or a 26-digit string for the hexadecimal format).

When setting [WPA-PSK] as authentication : Set key and select [OK].

Input either 8 to 63 alphanumerics or a 64 digit string in the hexadecimal format.

※“Glossary” (See page 62)

Important video/audio data is protected because AES※ encryption processing takes place in advance for all network numbers, even if [ENCRYPTION] is set to [NONE].

※“Glossary” (See page 62)

51